Measure both sides of the mount
Measure the phone's width and thickness with the case, sleeve or skin you actually use. Weigh the complete phone-and-case combination if the holder lists a load limit. A phone's advertised screen size is not the same measurement as its case-on width.
Next identify the cart's mounting point. Measure a round rail's outside diameter, or ask the holder maker how to measure a square or irregular section. Confirm with the cart maker that the location is suitable for a clamp; do not assume every rail, handle or accessory post accepts one.

A clamp example: RAM X-Grip with Tough-Claw
RAM's X-Grip Phone Mount with Snap-Link Tough-Claw, part RAM-HOL-UN7-400U, lists a holder width range of 1.875 to 3.25 inches, a maximum device depth of 0.875 inch and a clamp range of 0.625 to 1.14 inches in diameter. RAM says to check the device with its case, sleeve or skin and lists a 0.5-pound weight capacity.
Consider this model only if your actual case-on device and intended rail meet the stated limits and the cart maker accepts the mounting position. The listed range is a starting point, not proof that the clamp will fit a particular cart or that a phone will stay in place on every path. RAM includes an optional tether and recommends it for outdoor applications.
A cart accessory example: Clicgear SPM001
Clicgear's Universal Phone Mount, SPM001, is another style of accessory. Its page describes compatibility with most 5-to-7-inch smartphones, but does not state a case-on width range. It specifically says the accessory is not compatible with the Clicgear Model 4.5 push cart.
Ask the maker about your exact phone, case and cart before ordering if those details are not clear. Do not transfer the RAM clamp measurements to the Clicgear accessory or assume a push-cart accessory fits a riding cart.
Check access and folding clearance
With the cart parked, check whether the installed holder would leave the screen, charging port and side buttons accessible without pressing them. Keep it clear of steering, brakes, bag straps and any sightlines. Stop the cart before viewing or operating the phone.
If the cart folds, inspect the full folding path for the exact proposed mounting position. You may need to remove or reposition a holder before folding; neither product specification establishes clearance for every cart.
Choose, skip or keep what works
Choose a holder only when the device size, weight, mounting point and clearance are confirmed for your setup. Skip a model if the case-on dimensions or cart attachment cannot be matched. If your existing phone setup works, keeping it is a reasonable no-buy option.
The linked guides contain affiliate links; ParteeTime may earn a commission from qualifying purchases.
A separate clip-on GPS may suit someone who only needs yardages and is willing to charge and update another device; our G12 guide explains that ownership choice. For swing filming, our phone-tripod guide covers the separate placement decision rather than cart mounting. Neither guide proves that a cart holder fits.
Will the RAM X-Grip fit my phone with its case?
RAM lists a 1.875-to-3.25-inch holder width range, maximum 0.875-inch depth and 0.5-pound weight capacity for RAM-HOL-UN7-400U. Measure and weigh your device with its case; the numbers do not establish fit for a particular cart.
Will the RAM clamp fit any golf cart?
No universal fit is established. RAM lists a clamp range of 0.625 to 1.14 inches in diameter. Check the rail's size and shape, the cart maker's guidance and available clearance.
Does the Clicgear SPM001 fit the Model 4.5?
Clicgear specifically says that accessory is not compatible with its Model 4.5 push cart. Ask the maker about your exact phone, case and other cart models.
Can I fold the cart with a phone mount attached?
That depends on the cart, mount and position. The checked specifications do not establish folding clearance for every cart; inspect the path and remove or reposition the holder if needed.


