Golf Grip Replacement Kits: Check Compatibility and What Is Included

Check the box contents first

The maker lists Basic 2×10 with 15 strips of tape, each 2 x 10 inches, and a 4 oz bottle of HF-100. Complete 2×10 adds a rubber shaft clamp. Neither variant supplies the replacement grips themselves. The product listings also do not list a bench vise or hook knife. The maker’s tutorial shows its rubber clamp secured in a vise and includes tape removal in the job, so do not mistake the included clamp for a complete vise setup.

Make a count before buying: clubs to regrip, replacement grips to source, and each tool or consumable you already own. The listed number of tape strips is not a promise about how many clubs they will cover for your chosen build-up. This is a buying and compatibility guide, not a removal or cutting tutorial.

Match the grip core to the shaft butt

Check the actual replacement grip’s stated core size against the measured outside diameter at each club’s shaft butt. Include the tape build-up you intend to use, then confirm the combination with the grip maker or a club fitter. Do not assume that a family name, club type, or standard-size label guarantees fit.

Golf Pride’s product FAQ notes that a grip core smaller than the shaft can feel larger and firmer. That is a useful fit warning, not a universal compatibility chart. If either dimension or the intended tape build-up is unclear, pause and ask the maker or fitter before ordering. The kit contents alone cannot establish that a particular grip fits your clubs.

Choose Basic, Complete, or neither

Choose Basic 2×10 if you already have a suitable rubber shaft clamp and want the listed tape and HF-100. Choose Complete 2×10 if you need that clamp; you will still need a vise for the maker’s illustrated setup, plus replacement grips and any other missing tools. Neither choice is an all-in-one grip purchase.

Skip both kits if you expected new grips in the box, cannot verify the fit, lack a suitable workspace, or prefer to have a fitter handle the job. A fitter is also a straightforward option when buying or storing the missing setup equipment would not make sense for the number of clubs involved.

For the manufacturer’s current kit photographs and full inventory, view Brampton’s official kit page. The illustration here explains the supplies and fit decision; it does not depict these exact models.

As an Amazon Associate we earn from qualifying purchases. Links below are affiliate links. Check the exact variant, delivery and current availability before ordering.

Compare the full cost with a fitter

Use the same club count and exact grip model on both sides. DIY total means the kit plus replacement grips, any missing setup tools or other required supplies, and any local disposal costs that apply. A fitter comparison should include those same grips, labor, and any additional quoted charges. Use current prices and a written or confirmed quote; this guide does not supply prices or claim that either route saves money.

Already own the setup? Price only what is missing before buying another kit. If you need grips but your existing supplies are adequate, buy the grips separately rather than duplicating a kit. If tape or HF-100 is all you need, ask the seller whether those items are available separately; standalone refill availability was not verified here. If nothing needs replacing, the sensible choice may be no purchase.

Plan a safe workspace

Follow the current HF-100 label and safety data sheet. The checked SDS calls for protective glasses and adequate ventilation and identifies skin, eye, and respiratory irritation, along with swallowing and aspiration hazards. If you cannot meet the stated precautions, use a fitter or postpone the work.

Plan disposal under the applicable federal, state, provincial, and local rules, including for empty containers; the SDS places responsibility on the owner. If the correct route is unclear, check with the local waste facility. This guide makes no harmlessness or drain-safety claim and gives no blade instructions.